How To Make a Catamaran Boat Origami? (A Step-by-Step Guide)


Are you looking for a fun and creative way to spend your afternoon? Look no further than origami! With origami, you can create all kinds of imaginative works of art, from simple shapes to more complex designs.

This step-by-step guide will teach you how to make a catamaran boat origami.

We’ll provide you with the materials needed, as well as detailed instructions on how to create the square base, hull, sail, mast, and finishing touches.

Once you’re done, you’ll be able to fold and assemble your very own catamaran boat origami.

Get ready to make something amazing!

Short Answer

To make a catamaran boat origami, you will need two rectangular sheets of paper.

First, you will need to fold each sheet of paper in half along the length.

Next, fold each sheet in half again along the length and unfold.

Take one of the halves and fold the bottom edges up to meet the center fold.

Repeat with the other half.

Then, open up the paper and fold the top left corner down to the bottom right corner, and the top right corner down to the bottom left corner.

Finally, fold the top and bottom edges towards the center to make a boat shape and your catamaran is complete!

Materials Needed

Making a catamaran boat origami requires just a few simple materials: a square piece of paper, scissors, and a ruler. You can use any type of paper, but thinner and more pliable paper will make it easier to fold. If you want to use thicker paper, you can use a sharp pair of scissors to cut it into a square shape. Also, a ruler will help you measure and make sure that your folds are even.

Once you have all your materials ready, you can start making your origami boat.

First, you’ll need to fold your paper in half diagonally.

Then, fold the paper in half again, in the same direction.

This will create a triangle shape.

Use the ruler to make sure your folds are even and your edges are neat.

Next, you’ll need to fold the triangle in half one more time.

This will create a long, thin triangle that will form the shape of your catamaran boat.

Now, you’ll need to make a few more folds to give your boat its shape.

Start by folding the two pointed corners of the triangle into the center.

This will form the hull of the boat.

Then, fold the two sides of the triangle up to make the deck.

Finally, fold the remaining corner up to make the bow of the boat.

Once you have the shape of your boat, you can use scissors to give it a neat finish.

Cut off any excess paper and make sure the edges are even.

You can also use a marker to draw on details such as windows, sails, and other decorations.

With a few simple materials and a bit of patience, you can make a beautiful origami catamaran boat that will look great on any desk or shelf.

Step 1 – Create a Square Base

Creating a square base is the first step in making a catamaran boat origami.

To do this, you will need a square piece of paper.

Start by folding the paper in half diagonally, and then unfold it.

Then, fold the paper in half again, this time horizontally, and unfold it.

You should now have a square piece of paper with four distinct creases.

Now, fold each corner into the center of the paper, so that the paper is now folded in quarters.

Unfold the paper, and you should now have a square base with four creases.

This will be the basis for your catamaran boat origami.

Step 2 – Create the Hull of the Boat

Making the hull of your catamaran boat origami is the next step in the process.

To create the hull, start by folding the paper in half diagonally.

Unfold the paper and then fold it in half again, this time horizontally.

Unfold the paper and then fold the two edges in towards the center line, creating an accordion fold.

Once complete, the paper should now be in a triangular shape.

Next, fold the top corners of the triangle in towards the center.

This will create a point at the top of the triangle and a small rectangle at the bottom.

Flip the paper over and repeat the same process on the other side.

Now, fold the top triangle down and tuck the sides of the rectangle into the two pockets, forming the hull of the boat.

To secure the boat, use your fingers to press the edges of the pockets together tightly.

You should have a rectangular boat shape when done.

Congratulations! You have successfully created the hull of your catamaran boat origami.

Step 3 – Create the Sail

Once you’ve created the base of your catamaran boat, it’s time to make the sail! To do this, you’ll need two pieces of rectangular paper.

Take one piece and fold it in half lengthwise.

Fold it again, and then unfold it.

You should now have a rectangle with a horizontal crease down the middle.

Take the other piece of paper and lay it on top of the first one, overlapping them slightly.

Then take your index finger and press down on the overlapping edges to make two creases.

Next, fold the edges of the paper inward to create a triangular sail shape.

To make the tips of the sail, fold the paper at the corner and tuck the edges underneath.

Once you’ve done this, you should have a perfect origami sail.

You can now attach it to the base of your boat by folding the corners of the sail inwards and tucking them underneath the boat.

Now you have a complete origami catamaran boat! You can make it look even more realistic by decorating it with markers or stickers, or you can leave it plain and simple.

No matter what you decide, you’ll have a unique origami boat to show off to your friends and family!

Step 4 – Make the Mast

Making the mast is the fourth step in creating your origami catamaran boat.

The mast is the pole that will hold the sails and help the boat move through the water.

To make the mast, you will need to fold the paper in half, then in half again, and then in half a third time.

Then, you will open the paper up so that you have a tall, slender triangle.

Next, take the left side of the triangle and fold it in half, making sure the two sides are even.

Then, unfold the triangle and bring the top left corner down to the right side.

Repeat this step on the other side.

Finally, at the bottom of the triangle, fold the paper up and tuck it into the fold at the top.

This will create the mast of your origami catamaran boat.

Your boat is now ready to be sailed!

Step 5 – Finishing Touches

The final step in making your origami catamaran boat is the finishing touches.

This is where you can get creative and make your boat look as unique as you want! You can use markers, crayons, colored pencils, or any other drawing supplies you have on hand to give your boat a special touch.

You can also add embellishments such as ribbons, shells, or small decorations to make your boat stand out even more.

To ensure your boat looks its best, make sure to use quality materials that will not tear or fade over time.

Once you’ve finished adding your special touches, your origami catamaran boat is complete and ready to sail!

Step 6 – Fold and Assemble the Boat

Now that you have all the pieces of your boat ready, it’s time to assemble them to form the finished product.

Start by taking your two hull pieces and matching them up side by side.

Make sure the edges line up evenly and that the bottom edges of the hulls are flush against each other.

Take your two center pieces and place them on top of the hulls, making sure they are centered and the edges line up.

Next, fold the center pieces over the hulls.

Take one end of the center piece and fold it over one hull, then do the same with the other end and the other hull.

It should look like a sandwich with the center pieces on the outside and the two hulls in the middle.

Secure the pieces together by pressing down firmly on the center pieces.

Finally, fold the two sides of the boat up to form the sides of the boat.

Take each side of the center piece and fold it up so that it is perpendicular to the hulls.

You should now have a boat with three sides and the bottom.

Secure the sides in place by pressing down firmly.

Now you have a fully assembled origami catamaran boat.

Final Thoughts

By following the six simple steps in this tutorial, you can make your own origami catamaran boat in just a few minutes! With a few basic materials, you can craft a perfect miniature version of this traditional boat.

Now that you know how to make a catamaran boat origami, why not give it a try? All you need to do is grab a square piece of paper, and you’re ready to go!

James Frami

At the age of 15, he and four other friends from his neighborhood constructed their first boat. He has been sailing for almost 30 years and has a wealth of knowledge that he wants to share with others.

Recent Posts